ONLINE INQUIRY

*Note: Please be sure to fill in the information accurately, and keep the communication unblocked, we will get in touch with you as soon as possible

SUBMIT
sub2

Mature and stable supply chain

PRODUCT

A36 Carbon Steel Bar

A36 Carbon Steel Bar

→

A36 is a low-carbon steel containing trace amounts of manganese, phosphorus, sulfur, silicon and other elements such as copper. A36 has good weldability and high yield strength, and is the most specified structural steel plate by engineers. ASTM A36 is most commonly manufactured as a variety of structural steel parts. This grade is used for welded, bolted or riveted construction of bridges and buildings, as well as for general structural purposes. Due to its lowest yield point, A36 can be used to design lighter-weight structures and equipment, and provide good weldability.

A572/S355JR Carbon Steel Bar

A572/S355JR Carbon Steel Bar

→

A572 steel bars are lightweight, but have good strength, ductility and workability, making them ideal for structural applications. These characteristics make the A572 relatively simple to shape into different structures, while maintaining the ability to withstand large stresses and loads.

A105 Carbon Steel Bar

A105 Carbon Steel Bar

→

A105 is an ASTM specification for steel forgings, primarily for carbon steel forged pipe components. The type of carbon steel wrought alloy involved is a low carbon, manganese and silicon steel similar to the AISI 1330, but with a lower manganese content.

304L Stainless Steel Bar

304L Stainless Steel Bar

→

304L is one of the austenitic stainless steels with a chromium content of at least 18%, a nickel content of at least 8%, and a maximum carbon content of 0.03. 304L stainless steel is an ideal choice for various household and commercial applications, with excellent corrosion resistance, ease of manufacturing and excellent formability. Austenitic stainless steels are also considered to be the easiest to weld among high alloy steels and can be welded by all fusion and resistance welding processes.

AISI/SAE 1018 Carbon Steel Bar

AISI/SAE 1018 Carbon Steel Bar

→

AISI 1018 carbon steel round bars are made of carbon steel, and its composition includes carbon, chromium, manganese, molybdenum, phosphorus, sulfur and silicon. Carbon steel SAE1018 rods are commonly used for shafts, pins, rods, spindles, sprocket assemblies and a wide range of parts. The 1018 bar can be finely processed without any difficulty, and its chips are hard and continuous, so it can be processed into all shapes.

EN8/EN9 En Series Carbon Steel Bar

EN8/EN9 En Series Carbon Steel Bar

→

En-8 (1040) It is an unalloyed medium carbon steel with reasonable tensile strength. It is usually supplied in a cold drawn or rolled state. Tensile properties may vary, but are usually between 500 - 800 N/mm. It is widely used in applications that require better performance than mild steel but cannot justify the cost of alloy steel. EN8 can be flame or induction hardened to produce good surface hardness and moderate wear resistance.

AISI/SAE 1025 Carbon Steel Bar

AISI/SAE 1025 Carbon Steel Bar

→

1025 carbon steel is a steel that contains only carbon as its main alloying element. These steels also contain 0.4 percent silicon and 1.2 percent manganese. Small amounts of copper, nickel, molybdenum, aluminum and chromium can also be detected in carbon steel.

AISI/SAE 1045 C45 Carbon Steel Bar

AISI/SAE 1045 C45 Carbon Steel Bar

→

1045 is characterized by medium carbon, medium tensile strength steel, which has quite good strength, machinability and reasonable weldability under hot-rolled conditions. 1045 round steel can be provided with hot rolling, cold drawing, rough turning or turning and polishing. By cold-drawing the 1045 steel bar, the mechanical properties can be improved, the dimensional tolerance can be improved, and the surface quality can be improved.

AISI/SAE 4130 Carbon Steel Bar

AISI/SAE 4130 Carbon Steel Bar

→

4130 cold-rolled round bars provide some recognized weldability without affecting the wear and impact resistance of the steel, carbon steel 4130 bars also have excellent machining properties and can be heat treated. At the same time, it has high tensile strength and high yield strength.

< 12345 > proceed page

ENQUIRE NOW

If you are interested in our products and services, please contact us or leave us a message, we will serve you wholeheartedly

Submit
%{tishi_zhanwei}%
TIANXINGJIAN

EMAIL:

info@txj-steel.com

Whatsapp:

+86-15163516688

Phone:

+86 15163516688

WeChat:

15163516688

WhatsApp

WhatsApp

WeChat

WeChat

Copyright ©

Powered by 300.cn  |  SEO | Privacy policy

【 Business license】